WebGate WebEye E10 Uživatelský manuál stáhnout pdf (Strana 3)

1.4 Internet Browser Requirements

l Internet Explorer 4.0 and above

l Netscape Navigator 4.5 and above

1.5 Check LAN

l The WebEye should be connected to a

10 Base-T LAN

. 10 Base-T LAN is standard for

network configuration.

l In the rare instance of 100 Base-T LAN, a 10/100 switching hub will be needed to

convert 100 Base T to 10 Base T.

2. Connecting Ethernet and Power Cables to WebEye.

2.1 Connect network and power to WebEye.

l Make sure that indicator lights and dipswitches are as follows.

Connect LAN

cable (RJ-45).

The power input jack.

Use the included 5-volt

power adapter.

8. Check IP

address and Net

mask.

7. Go to ‘IP Address’

5. Go to ‘Gateway’

6. Check gateway address.

3. The green LED should

blink

every 1-2 second(s) 1-

2 seconds

after receiving power.

4. After receiving power,

yellow LED

should go on for 5-

6 seconds and then

go off. This LED starts to blink when

user accesses WebEye.

1 2 3 4 5 6 7 8 ... 15 16

Žádné komentáře

WebGate WebEye E10 Uživatelský manuál Strana 3