WebGate WebEye E10 Uživatelský manuál stáhnout pdf (Strana 6)

Please note!!

When an IP address is assigned to the WebEye, be careful not to assign the

WebEye with an IP address that is not compatible with the local network or

that is already in use by another computer or similar device. Please refer

below example and assign an IP address to WebEye.

Gateway address 192.168.1.1

Subnet mask 255.255.255.0

Broadcast address 192.168.1.255

Already used IP address 192.168.1.2 ~ 192.168.1.50

Available IP address for WebEye 192.168.1.51~ 192.168.1.254

However, if there is a subnet mask of 255.255.255.128, then IP addresses

from 192.168.1.129 to 192.168.1.255 are not in the same local network as the

IP address of 192.168.1.1 to 192.168.1.128.

* IP Address and MAC Address *

IP Address

IP address is an identification code for computers and devices on a TCP/IP network. Networks using

TCP/IP

protocol route messages based on the IP address of the destination. Within a closed network,

IP addresses can be assigned at random as long as each one is unique. However, connecting a private

network to the Internet requires using registered IP addresses to avoid duplicates.

IP address can be

acquired from a network administrator or an I nternet service provider.

MAC Address (Media Access Control Address)

MAC address is a

hardware identification code that uniquely identifies each node of a network. The

C layer interfaces directly with the network media. Consequently, each type of network media

requires a different MAC layer. The MAC address of WebEye is a 12-digit number.

A unique MAC

address can be found on the label at the bottom of each WebEye.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Žádné komentáře

WebGate WebEye E10 Uživatelský manuál Strana 6